SR Users Manual Latest Version 2-9-11
Installation instruction are in users manual. You must install software in correct order to get your sr to work.
Inkscape version 0.47 Latest Version 6-22-10
Wasatch Color Profiles for Epson B500 build 1 4-23-10

Cutter driver 2.10e Latest Version 4-7-11
Remote Panel 12-r9 Latest Version 4-7-11
Samples Latest Version 2-7-11


Technical Support Bulletins

Title: Installing a Firmware and/or Remote Panel Upgrade
Abstract: This procedure details the firmware or Remote Panel upgrade procedure. Normally firmware is only sent to customers when a software problem is reported that has been fixed in a later version of the software.
Last update 6-1-10

Title: Wasatch cost estimator Abstract: The wasatch program has a cost estimator to estimate the print cost of a job This document shows how to start the estimator and run it for a job. Last Update April 2010

Title: Plotting with two forces/speeds in single job Abstract: It is sometimes useful to be able to cut with two different forces or two different speeds within the same job. This is easily accomplished by creating artwork that has different colors for each speed/force combination.

Skew Adjustment
Abstract: Adjustment to the loading of the media to correct for minor skew errors without using more than one target. This procedure assumes tracking is working correctly.
Last update 4-16-4

Color Response

Fo LED Debug

Getting Started With SmartMark

Origin Scale Method

Scan Directions

What Targets must not have ouline stoke

Title: Mandrel Motor Trouble Shooting Abstract: If you have a problem with one of the Mandrel’s not operating you can use this troubleshooting procedure to determine if problem is in the circuit board, the pot or the motor. 
Last update 8-7-6

Title: USB driver repair
Abstract: The usb driver may not be installed correctly if you plug your cutter into your computer before the driver is installed on the computer. If you cannot communicate at all when you attempt to install the cutter driver, follow the procedure outlined here.

Title: Using Ethernet Connection
Abstract: This document describes the options for using Ethernet or Lan connection between mmc cutter and a computer. There are three options. One is direct connect with crossover cable and the other is plug cutter into your network, and the third is to buy a switch and a cable and breakout a single Ethernet wall jack into more than one Ethernet port.

Title: Changing between metric and English units of measure

Title: Display HPGL file contents Build 8
Abstract: This program reads an HPGL file and displays/prints the graphic image that it represents. It also converts the file to a format that is easy for Microsoft Excel to read and graph. The Excel file is written to c:/Program Files/Allen Datagraph/Display HPGL/HpglOutput before combine.xls during the display processing of the file. To graph using Excel, Install Microsoft Excel. Open the file with Excel by double clicking on the filename after locating it with Windows explorer. Then select columns A,B. Click on View, Tools, Chart. Use the graphing tool to generate a scatter plot. New Feature build 6 digitize and send job with origin, skew, and scale. Last update 5-21-3. Size: 953,184 bytes
How to install: Download file, Run Setup, Start, Programs, Allen Datagraph, Display HPGL

Title: Calibration to Size
Abstract: This TSB is written to help users calibrate the size of objects printed to be the same as indicated by the computer cad program. Use the Smart Mark Setup (Calibration, sensor offset, sensor size) if you plan to cut labels.
Last update 8-15-3

Title: Technical Adjustments to Restore Cut Quality to Normal
Abstract: If cut quality is not as good as when you received your machine there are several mechanical adjustments that can be checked that affect the quality of the objects drawn. 
Last Update 11-13-5

Title: Adjusting Perpendicularity
Adjustments to correct cut through.

Using the controlled depth adjustment
Abstract: This support bulletin shows the usage of the controlled depth knife holder to allow cutting very thin materials. You would need to use this procedure when higher forces cut through the backer in places and not cut through the material in other places. 
Last update 5-4-4

Electrical Test for Encoder  
Abstract: This TSB describes a procedure to test the encoders on motors used by Allen Datagraph. You can use this test if you suspect the encoder on your motor is malfunctioning. 
Last Update 2-28-8